Hydraulic Fault Simulation Training Bench 5987SAOZ

I. Main Bench Parameters
1. Power Supply: National Standard Industrial Power—AC 380V, 50Hz;
2. Control Voltage: Safety Control Voltage—DC 24V;
3. Total System Power: ≤4kW;
4. Hydraulic Pump Unit: Equipped with a hydraulic oil pump and drive motor, with a nominal oil tank capacity of 40L; Pump Unit Power: 1.5kW;
5. System Safe Operating Pressure: P <= 6.3MPa;
6. Dimensions (mm): 1630 × 750 × 1850;
7. Weight: Approximately 300kg.
8. Includes an instructional video with subtitles and audio instructions. (Video demonstration will be provided at the bidding site)
II. Practical Training Projects
(1) Simulation of hydraulic pump oil inlet filter blockage
(2) Solenoid overflow valve fault training (main valve core return spring broken or bent)
(3) Common faults such as poor sealing of hydraulic pump oil inlet pipe and excessive resistance
(4) Faults such as reversing valve core stuck, incomplete reversing, and no reversing
(5) Faults such as throttle valve orifice blockage
(6) Faults such as pressure valve spring failure
(7) Faults such as hydraulic cylinder internal unloading
(8) Hydraulic shock fault caused by abnormal hydraulic energy storage module